The front fender is mounted now as well as the rear tire. All the wiring is complete and tested.
The seat was reshaped and tonight we stretched the cover and refitted it to the pan. Tomorrow the bike gets a 4 hour clean and polish job. After it gets completely cleaned it will be started and test ridden.
Seat fitment to the tank.
Today I slid a mirror under the bike and took a picture. You can see the brake line entering the frame. Also you can see the polishing and the matched cases of the underside of the motor. Also note that 5 wires disapear behind the regulator.
Not bad looking considering it is something that you'll never see.